Pls see www.youtube.com/embed/U1bj1j6ldC0 Ⅰ.1.Make sure the working voltage is between ~100-120V 60Hz 2.Ensure the machine switch is on “off” status 3.Put the product on table, plug into the socket 4.Cleaning Ⅱ.1.Put the material into the cup. Do not add material over the Maximum level.Some fruits, please cut to 3CM peace, this will help the blending efficiency and result. 2.Close the cup cover, and turn the small cup on the top of cup cover. If you need to use the stir rod during the operation, please open the small cup,insert the stir rod through the top hold on the cup cover. 3. Fix the cup correctly on the body of the machine. Ⅲ.1.Please keep around 20CM safety distance between the machine and operator. 2.On/Off: Turn on the machine, it will start slowly. Please adjust the speed and time base on different material. 3.Pulse Switch: Turn this switch to “on” status, the machine will working by full power, the other function can not be used at this moment. Loose the Pulse switch, the switch will auto go to “Off” status. Can be use repeated if it is required. This function is use base on necessary. 4.After operation, please turn all the button as pre-setting. Take the cup down when the machine is completely stop. Ⅳ.1.Time control:This machine fitted with big power motor, high speed and efficiency. Normal material can be blending well in 45S. If needed, can extend to 2 minutes. 2. Add material during:1) please stop the machine, if you want to add much material or the blending is hot drinks, Even just a small quantity, please open the small cup on the top to add. 2) Please use another hand to hold the cup cover when take the cup,to avoid the cup cover loosing or cup shaking. 3.Use stir rod correctly: When the material is not easy to move or machine blocked, please use”Pulse” function to blending 2-3 times, in this case, please use stir rod to mix the material.